Four Years in the California Sun: A Paint Color Retention Study
Outdoor field comparison | June 2022 - May 2026 | Southern California
After four years in direct Southern California sun, how closely would exterior paint colors match a freshly applied sample of the very same product? A field comparison at a self-storage property offered a useful opportunity to see.
Field Study Overview
Location: Self-storage facility, Southern California
Exposure period: June 2022 to May 2026 (approximately four years)
Products featured: Endura-Crylic and BITMAP, alongside other commercial coatings
Purpose: Visually compare long-term color retention using fresh paint from the same products and batches as the original test patches
The Challenge: Keeping Brand Colors Consistent
Color consistency matters at self-storage properties, where branded doors, walls, equipment and trim are exposed to years of sun and weather. A coating that fades or changes shade may make a property look older and can complicate future touch-ups, even when the painted surface is otherwise serviceable.
The field comparison focused on how selected commercial coatings held their color under the same general outdoor exposure. The customer's Wasabi green color standard provided an additional visual reference.
How the Field Comparison Was Conducted
In June 2022, multiple paint products were applied as adjacent test strips at a Southern California self-storage property receiving full sun. In May 2026, fresh strips were applied directly in front of the original areas, using the same paint product and batch for each pair.
How to read the image: The rear row shows the original June 2022 paint. The front row shows paint freshly applied in May 2026. The closer the two strips appear, the less visible color change occurred over that four-year interval.
Four-year color-retention comparison. Endura-Crylic is at the far left; BITMAP is at the far right. The lower photograph compares weathered BITMAP with the Wasabi color standard.
What the Test Strips Showed
Endura-Crylic at the far left and BITMAP at the far right showed relatively little visible difference between the weathered and freshly applied strips. Several of the other products exhibited more noticeable fading or color shift.
Not every paint matched the Wasabi color standard equally well when initially applied. For that reason, the most meaningful observation is the difference within each original-and-fresh pair, rather than comparing the absolute shades of different products.
The lower portion of the comparison photograph also shows BITMAP after four years of outdoor weathering beside the Wasabi standard. The aged coating remained visually close to that reference color.
Additional Observations at the Property
The property also provided examples of painted doors and equipment exposed to the same general Southern California climate.
Utility-box doors at the property after approximately four years of outdoor exposure; their appearance remained relatively consistent.
Comparison swing doors painted with another professional industrial acrylic. Adjacent Janus panels and a taped color standard provide references for the visible color change.
The utility-box doors retained their appearance well. In contrast, the separately coated swing doors showed more apparent fading and color shift relative to the adjacent metal panels and taped color standard. These examples are supporting visual observations, not a controlled side-by-side performance test.
Results and Practical Significance
This four-year comparison illustrates the importance of evaluating coatings for color retention, not just their appearance on application day. Under the exposure conditions at this property, Endura-Crylic and BITMAP showed strong visual color retention relative to freshly applied samples of the same products.
For facility owners and contractors, maintaining a consistent exterior finish can help preserve curb appeal, support brand-image standards and reduce the visual mismatch that makes touch-up or repainting more noticeable.
Explore the Products
Endura-Crylic - A water-based acrylic enamel intended for primed and previously painted surfaces, including metal doors and other commercial applications.
BITMAP - A high-performance 100% acrylic coating designed for branding, accent painting and other applications where durable, vibrant color is important.
Study limitations: This was a real-world field comparison at one location, not a controlled laboratory study or a broad statistical assessment. Results can vary with substrate, preparation, coating thickness, application method, exposure, maintenance and climate. The observations should not be interpreted as a numerical fade rating or guarantee of future performance.
Source: Adapted from Four Years in the California Sun: A Real-World Paint Fade Comparison, published by All From 1 Supply on July 15, 2026.


